LUGRo-Mesh Forum (español/english)

The Nightwing Firmware => Future Requests / Wish List => Topic started by: truesword on May 25, 2009, 03:06:54 am



Title: Firmware request
Post by: truesword on May 25, 2009, 03:06:54 am
Hello – some request ideas with the Nightwing firmware:

1.   A menu option to change/alter output power
2.   Option to turn off public side,  (private network using mesh)
3.   Ability to ping/connect between two different nodes
4.   Ability to Firmware upgrade over WiFi mesh network, from the menu.
5.     Logon banner / Portal


TrueSword......


Title: Re: Firmware request
Post by: PCDOM on June 18, 2009, 06:56:25 am
Hello – some request ideas with the Nightwing firmware:

1.   A menu option to change/alter output power
2.   Option to turn off public side,  (private network using mesh)
3.   Ability to ping/connect between two different nodes
4.   Ability to Firmware upgrade over WiFi mesh network, from the menu.
5.     Logon banner / Portal


TrueSword......
Very good ideas !
Helene Gauthier


Title: Re: Firmware request
Post by: PCDOM on June 27, 2009, 08:01:28 am
Add PicoStation2 and 2HP, NanoStationLoco2 and loco5

Helene Gauthier


Title: Re: Firmware request
Post by: scriado on June 27, 2009, 11:01:12 am
Add PicoStation2 and 2HP, NanoStationLoco2 and loco5

We have a limitation on this request.
We do not have such equipments.
Of course, we accept donations of equipment for testing.


Title: Re: Firmware request
Post by: PCDOM on June 27, 2009, 12:07:41 pm
We have a limitation on this request.
We do not have such equipments.
Of course, we accept donations of equipment for testing.
If want want to make a donation to testing
I think the better way is to send money to buy PicoStation2 via Paypal ?

Helene Gauthier


Title: Re: Firmware request
Post by: scriado on June 28, 2009, 10:43:42 am
We have a limitation on this request.
We do not have such equipments.
Of course, we accept donations of equipment for testing.
If want want to make a donation to testing
I think the better way is to send money to buy PicoStation2 via Paypal ?

Helene Gauthier

If could be.
It should be noted that in Argentina the cost of equipment is higher than that of United States.


Title: Re: Firmware request
Post by: PCDOM on June 28, 2009, 01:37:30 pm
If could be.
It should be noted that in Argentina the cost of equipment is higher than that of United States.
Just say me the cost and PayPal address to send
My personal email is info@pcdom.biz


Title: Re: Firmware request
Post by: scriado on June 28, 2009, 03:02:05 pm
If could be.
It should be noted that in Argentina the cost of equipment is higher than that of United States.
Just say me the cost and PayPal address to send
My personal email is info@pcdom.biz
Ok. Thank you very much. I will find out the cost and  inform you in private.


Title: Re: Firmware request
Post by: scriado on July 02, 2009, 01:39:50 pm
If could be.
It should be noted that in Argentina the cost of equipment is higher than that of United States.
Just say me the cost and PayPal address to send
My personal email is info@pcdom.biz

Today i send you a private mail


Title: Firmware request -other option
Post by: PCDOM on July 10, 2009, 06:57:47 am
 Option to don't show private side Y or N (private side will be available but not publish)

Until this option will be available, can you say me how to do it before compilation ?


Title: Re: Firmware request -other option
Post by: JulioCP on July 10, 2009, 10:53:25 am
Option to don't show private side Y or N (private side will be available but not publish)

Until this option will be available, can you say me how to do it before compilation ?

You want to hide the Private AP ESSID?


              Saludos, Julio


Title: Re: Firmware request -other option
Post by: PCDOM on July 11, 2009, 10:47:08 am
You want to hide the Private AP ESSID?


              Saludos, Julio

Yes it is


Title: Re: Firmware request -other option
Post by: JulioCP on July 11, 2009, 11:08:52 am
You want to hide the Private AP ESSID?


              Saludos, Julio

Yes it is

To hide it you have to add 'iwpriv ath1 hide_ssid 1' after the interface is configured. It's better to use variables for the iwpriv command and the Private AP interface (check the code for examples).

More info about hide_ssid: http://madwifi-project.org/wiki/UserDocs/UsersGuide#hide_ssid-EnableDisableHidingofthe802.11SSID


                    Saludos, Julio


Title: Re: Firmware request -other option
Post by: PCDOM on July 15, 2009, 01:41:26 pm


To hide it you have to add 'iwpriv ath1 hide_ssid 1' after the interface is configured. It's better to use variables for the iwpriv command and the Private AP interface (check the code for examples).

More info about hide_ssid: http://madwifi-project.org/wiki/UserDocs/UsersGuide#hide_ssid-EnableDisableHidingofthe802.11SSID


                    Saludos, Julio

thanks this command works fine

'iwpriv ath1 hide_ssid 1'

if I want to compile firmware with hide ssid

where can I put this command ?

Helene Gauthier


Title: Re: Firmware request
Post by: PCDOM on July 24, 2009, 06:14:02 am
OK, I tested to change Wireless file in etc/config

# AP private
config wifi-iface private
   option device   wifi0
   option network  private
   option mode     ap
   option ssid     zaps
   option hidden   1
   option encryption       psk2
   option key      Lugr0-mesh

but the station cannnot reveived the $IFACE

is it possible and why ?


Title: Re: Firmware request
Post by: JulioCP on July 24, 2009, 07:52:49 am
OK, I tested to change Wireless file in etc/config

# AP private
config wifi-iface private
   option device   wifi0
   option network  private
   option mode     ap
   option ssid     zaps
   option hidden   1
   option encryption       psk2
   option key      Lugr0-mesh

but the station cannnot reveived the $IFACE

is it possible and why ?

First, open a new topic for this issue for more clarity.

Then, give more info, like the line of code where you get the value from this config file, the line of code where you use it.

That way we can see if there is a typo or else.


           Saludos, Julio